There are two kinds of people who drive a forklift with the forks dragging on the ground:

• Non-owner operators
• Idiots

Sometimes this can be one and the same person, without brains enough to realise that this practice is unnecessary and extremely expensive. 

How expensive? $13,000.00

Some years ago, one of our clients had to urgently replace their forks. The parts had to be freighted overnight because they could not
afford to be without the forklift. It really did cost $13,000.00!

Fork-dragging is the prime reason for forks wearing out prematurely. Workplace Health & Safety guidelines state that forks are unsafe if even 10% of the fork-heel’s thickness has been worn away.

Repairs impossible

Worn-out heels cannot be welded to be repaired or built-up. Why? Welding greatly compromises the strength and physical properties of the original heat-forged fork. Under stress or impact, the fork arm can fail unexpectedly. Replacement is the only option.

We’ll check and adjust 

Have your machine serviced by Active Fork Lifts and we’ll check fork wear. If possible, we’ll also adjust your forks so they sit just OFF the ground to prevent dragging. Ring us now on 3205 5500.

Prevention is better than cure. In between your regular services, you can prevent trouble by taking the simple steps in these newsletters. They will cost you nothing but could save you heaps.

But if you’re in deep trouble ... We’re there for you -- 24/7.
We go to all Brisbane suburbs. And all our parts and labour are guaranteed for three months. Ring 3205 5500 for prompt service.